Beef Jerky in the offset smoker

Wanted to try to make beef jerky in the offset smoker. As it has a smoking tower in addition to the regular main chamber, it should be good to make while smoking some ribs in the main chamber.

The temp in the smoke tower was between 60 and 80°C, while 120-130°C in the main chamber. (Using the thermometers on the smoker). 

I used the below recipe for the marinade. I marinated in a zip-lock bag in the fridge overnight. I will use half the amount or less chili flakes and black pepper next time. Hot!

I dried/smoked the meat for 4 hours and 15 minutes. Probably a bit too long time, as some got a bit crispy rather than chewy. And some got a bit burnt too. Could have moved it a bit around during the cook to avoid that. I used oak wood for the smoke and it got smoky in taste but not too much. But a bit less smoky flavour would not hurt so might reduce the time next time.


My recipe this time:

500g topside beef, thinly sliced (Norsk: Flatbiff).

1 tbsp red chili flakes

1 tbsp onion powder

1 tbsp garlic powder

1 tbsp paprika

1 tbsp ground black pepper

1/2 cup soy sauce

1/2 cup teriaki sauce

1/4 cup Worchestershire sauce

1/4 cup Brown sugar

1/4 cup maple sirup

Ready cut meat makes it very easy.

Marinated overnight.

Oak fired.

Smoke tower temp.

Meat is on.

Smoke tower temp.

After two hours.

After 4 hours and 15 minutes. A bit too much.

Salsiccia type sausages grilled in the fire box.

Ribs and sausages.

Store bought and home cooked.

Not bad with a cold beer :-)

Pulled pork in the offset smoker

Wanted to try to make pulled pork in the offset smoker. Done it several times on the WSM. Then done it overnight. So easy, just set it and go to bed and bring a wireless thermometer. Cannot do that with the offset smoker, it requires constant attention. So decided to speed up things by trying to cook on a higher temp and wrap it in foil underway. Fired up the smoker and got it warmed up and put the meat on 6 in the morning. 2,5kg pork shoulder. Tried to maintain around 135-140°C. However the temp fluctuated quite a bit during the cook so not sure the actual average temp. But it was at least closer to 150°C the first hour or so. Anyway, the end result was absolutely highly acceptable, just as tender as when cooked at a lower temp for a longer time.

Rubbed the night before.

A bed of charcoal to start the fire.

Getting the fire going.

6 o'clock and the meat is on.

Smoking.

After 2 hours.

After 2 hours.

More or less good smoke.

After 5 hours.

After 5 hours spraying with some apple juice.

After 5 hours spraying with some apple juice.

After 5 hours spraying with some apple juice.

After 5,5 hours.

After 5,5 hours.

Wrapped in foil after 5,5 hours. This to make it more tender, to cook faster and to get it out of the smoke, not over smoke it. Remember we are using only pure oak wood, not coals or briquettes.

After 7 hours the target core temp 90°C is met.

Put over to the coldest end to rest and I let the fire go out, did not add more wood. With closed lid and smokestack to retain the heat.

After 20 minutes resting the temp increased to 95°C, probably due to the relatively high cooking temp. I suspect however, that the probe was not entirely in the center so the actual temp was possibly a bit less. But it felt just right to touch.

After resting for 5 hours, the core temp was still 54°C. No need to rest so long but the dinner time was then.

Time to pull it apart.

Just right, not soggy and overcooked, just nice and juicy.

Doesn't get much better than this.

Oiling the offset smoker

These offset smokers are usually not coated with a very long lasting paint. So after some time, they look like mine, partially rusted. Especially the fire box where there is highest heat. You might sandblast it and re-paint it with high temp paint. But after advice and some googling, I decided to try to oil it a bit for the time being a least.

Partially red as a fox...

You can see where it has been hot.

Brushed off a bit with a wire brush and brushed with sunflower oil. Any cooking oil will do I guess.

I only oiled the lids of the fire box and the main chamber

Fired up some char coals in the fire box and the main chamber to dry the oil. 

Easy and good protection. Looks almost like a clear coat of paint.